2. Control lights illuminate
On" when programme is selected.
Active" when 3" is pressed.
End" when programme is finished.
Flashing control lights = operating fault.
3. Set the spin speed (if desired)
Variable; must click into place at 5".
4. Press buttons for additional functions
(where required to supplement the programme)
p": Shortened programme duration.
r": Additional rinsing cycle.
s": Reduces creasing.
It is also possible to combine the additional functions
at any time.
The control light above the option button lights
up when the respective additional function is active.
To cancel the additional function: Press the button again.
5. Press the 3" button
The washing process begins (programme must have been
selected).
1. Select a programme
Switches on / off the washing
machine.
Can be turned in both directions.
The programme selector cannot
be turned when the programme
is in progress. The programme
sequence is controlled electroniĆ
cally.
Control panel
To Next Page
Loading...
