30
This is necessary if the washing solution cannot be
completely drained. The pump is blocked by either
loose debris or fluff which accumulates if fluffĆgiving
fabrics are washed at high temperatures.
(Up to 20 litres / 4.4 gal. Have a suitable container
ready.)
d Risk of scalding!
Allow the hot washing solution to cool.
q Turn the programme selector to Off".
q Open the flap.
q Take the drainage hose out of the holder and pull
out of the housing.
q Remove the sealing cap and drain the water into a
receptacle.
q Press on the sealing cap and insert the drainage
hose into the holder.
Cleaning the drain
pump
Draining the washing
solution
To Next Page
Loading...
