Why has the soleplate of my Siemens slider SL45 turned brown?
If the soleplate of your Siemens Iron turns brown, it is a regular consequence of continued use over a long period of time. Clean the soleplate with a damp cloth.
What to do if water flows through the holes on the soleplate of Siemens Iron?
If your Siemens Iron is leaking water through the holes on the soleplate, it could be because the steam function is being used before the iron has reached the correct temperature, or because water has condensed inside the pipes due to infrequent use. To resolve this, reduce the steam flow when ironing at low temperatures. If that doesn't work, point the iron away from the ironing area and press the steam release button until steam is consistently produced.
How to fix a Siemens slider SL45 Iron that does not heat up?
If your Siemens Iron is not heating up, make sure the main power button is switched to the 'I' position (illuminated in red). Also, check that the temperature is set to the desired position, and not too low.
Why is dirt coming out of my Siemens slider SL45 Iron?
If dirt is coming out through the soleplate of your Siemens Iron, it could be due to a buildup of scale or minerals in the steam tank, or because chemical products or additives have been used. To fix this, use tap water mixed 50% with distilled or demineralized water. To prolong the optimum steam function, mix tap water with distilled water 1:1. If the tap water in your district is very hard, mix tap water with distilled water 1:2. Clean the soleplate with a damp cloth and never add products to the water.
Why does my Siemens slider SL45 smoke when I turn it on?
If your Siemens Iron begins to smoke when switched on, it is likely due to certain components being lightly greased at the factory during first use, or the soleplate may be soiled during subsequent use. This is completely normal and will stop after a short while. If it continues, clean the soleplate.
What to do if Siemens Iron makes garment turn dark?
If the ironed garment turns dark or sticks to the soleplate of your Siemens Iron, it means that the selected temperature is too high and has damaged the garment. Select a suitable temperature for the material being ironed and clean the soleplate with a damp cloth.
How to turn on the beep on my Siemens slider SL45 Iron?
If you cannot hear the beep when touching the display of your Siemens Iron, it means that the beep has been deactivated. Activate it according to instructions in this manual.
Why is my Siemens Iron boiler leaking water?
If there is water leakage from the boiler of your Siemens Iron, the filter located at the side of the appliance is loose. Tighten up the filter.
Why does my Siemens slider SL45 Iron leave water spots on my clothes?
If water spots appear on the garment during ironing with your Siemens Iron, it may be caused by steam condensed on the ironing board. Wipe the textile cover of the ironing board, and iron any water drops to dry them.
What does it mean when icon flashes on Siemens slider SL45 Iron?
The flashing icon on your Siemens Iron indicates that the water tank is empty. You need to fill the water tank.
Description of the water tank, a key component for steam generation in the appliance.
Description of the removable iron pad, used for resting the hot iron.
Description of the carrying handles for safe and easy transport of the appliance.
Description of the calc'nClean Plus scale collector for boiler maintenance.
Description of the integrated storage compartment for the steam hose and mains cable.
Description of the mains cable used for connecting the appliance to the power supply.
Description of the steam hose connecting the iron to the steam generator.
Description of the 'Energy Saving' button for optimizing energy and water usage.
Description of the pilot light indicating steam readiness and auto shut-off status.
Description of the variable steam control dial for adjusting steam output.
Description of the pilot light indicating low water level or need for cleaning.
Description of the main power button that illuminates when the appliance is switched on.
Description of the 'secureLock' system for safely fixing the iron to the base unit.
Description of the appliance housing containing the internal steam generator.
Description of the knob used to set the ironing temperature for different fabric types.
Description of the steam release button used to activate steam output.
Description of the 'XTRM' steam release button for enhanced steam control.
Description of the pilot light indicating when the iron has reached the set temperature.
Description of the iron's soleplate, the main ironing surface that contacts garments.
Description of the fabric-protection soleplate cover for ironing delicate fabrics.
Provides advice on how to correctly set the ironing temperature for different fabrics based on labels and garment types.
Instructions on how to properly attach the fabric-protection soleplate cover to the iron.
Procedure for cleaning the steam generator's boiler to remove scale and prevent buildup.
General| Technology | GSM |
|---|---|
| 2G bands | GSM 900 / 1800 |
| EDGE | No |
| SIM | Mini-SIM |
| Type | Monochrome graphic |
| Call records | 10 dialed, 10 received, 10 missed calls |
| Loudspeaker | No |
| 3.5mm jack | No |
| Radio | No |
| Games | Yes |
| Java | No |
| Size | 5 lines |
| Alert types | Vibration; Monophonic ringtones |
| Messaging | SMS |
To Next Page
