EasyManua.ls Logo

Siemens SN55ES08CE - Page 5

Siemens SN55ES08CE
60 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Security
WARNING
- Risk of electric shock!
Improper installations are dangerous.
▶ Only connect and operate the device in accordance with the
information on the nameplate.
▶ Always use the
power cable supplied with the new device.
▶ Only
connect the device to an alternating current power supply
via a properly installed earthed socket.
▶ The protective conductor system of the electrical
house
installation must be installed correctly.
▶ Never
power the device via an external switching device,
e.g. B. timer or remote control.
▶ When the device is installed, the mains plug of the mains
connection
cable must be freely accessible, or if free access is not
possible,
a disconnecting device must be installed in the fixed
electrical installation in accordance with the installation
regulations.
▶ When setting
up the device, ensure that the power cable is
not pinched or damaged.
Cutting
the inlet hose or submerging the Aquastop valve in
water is dangerous.
▶ Never immerse the plastic housing in
water. The plastic housing
on the inlet hose contains an electric valve.
▶ Never
cut the inlet hose. There are electrical connection cables
in the inlet hose.
WARNING
- Danger of fire!
Using
an extended power cord and unauthorized adapters is
dangerous.
▶ Do
not use extension cables or multiple socket strips.
▶ Only use adapters
and power cables approved by the
manufacturer.
▶ If the mains
connection cable is too short and a longer mains
connection cable is not available, contact a specialist electrician
to adapt the house installation.
5

Table of Contents