Siemens SR25ZI11ME User Manual

Before using for the first time en
23
Before using for the first time
Before using for the
first time
Configure the settings for initial start-
up.
Performing the initial configura-
tion
On initial start-up or after a reset to
the factory settings, you will need to
make settings.
Tip:Connect your appliance to a mo-
bile device. You can conveniently
change all settings via the
HomeConnect app.
→"HomeConnect quick start",
Page36
Requirement:The appliance has
been installed and connected.
→Page12
1.
Add special salt. →Page24
2.
Add rinse aid. →Page26
3. Switch on the appliance.
→Page31
4. Setting the water softening system.
→Page24
5. Set the amount of rinse aid to be
dispensed. →Page26
Tip:You can change these settings
and other Basic settings →Page34
at any time.
Water softening system
Water softening system
Hard water leaves limescale on the
tableware as well as the washing
tank and parts of the appliance may
become blocked.
To ensure good dishwashing results,
you can treat the water with special
salt and the water softening system.
To avoid damage to the appliance,
water with a hardness above 9 °E
must be softened.
Overview of water hardness settings
You can find an overview of the water hardness values that can be selected
here.
You can find out how hard your water is from your local water company or by
using a water hardness tester.
Water hardness °E Hardness range mmol/l Setting value
0 - 8 Soft 0 - 1.1 H00
9 - 10 Soft 1.2 - 1.4 H01
11 - 12 Medium 1.5 - 1.8 H02
13 - 15 Medium 1.9 - 2.1 H03
16 - 20 Medium 2.2 - 2.9 H04
21 - 26 Hard 3.0 - 3.7 H05
27 - 38 Hard 3.8 - 5.4 H06
39 - 62 Hard 5.5 - 8.9 H07

Siemens SR25ZI11ME Specifications

General

Brand	Siemens
Model	SR25ZI11ME
Category	Dishwasher
Language	English