How to fix E:20-60 error on Siemens SX63HX52CE Dishwasher?
If the E:20-60 error code is alternately lighting up on your Siemens Dishwasher, you should descale the appliance and operate the appliance with the water softening system.
What to do if the E:32-00 error code appears on my Siemens SX63HX52CE?
If the E:32-00 error code appears, or the water supply indicator lights up, it could be due to several reasons: * The supply hose might be kinked. Ensure it is installed without kinks. * The water tap might be turned off, jammed, or furred up. Turn on the water tap. * The filters in the water connection of the supply or AquaStop hose might be blocked. In this case: 1. Switch off the appliance. 2. Pull out the mains plug. 3. Turn off the water tap. 4. Unscrew the water connection. * You may need to remove the filter from the supply hose.
What to do if Siemens SX63HX52CE Dishwasher shows error code E:61-02?
If your Siemens Dishwasher displays the error code E:61-02, it indicates that water is not being drained properly. Here's what you can do: * Turn off the water tap. * Check if the wastewater pump is blocked and clean it if necessary. * Ensure the cover of the wastewater pump is securely in place. * Inspect the wastewater hose for any blockages or kinks and reposition it to remove any kinks. * Verify that the siphon connection is not sealed and open it if necessary.
What does error E:31-00 mean on a Siemens SX63HX52CE Dishwasher?
If error code E:31-00 is displayed on your Siemens Dishwasher, it means the water protection system has been activated. Turn off the water tap.
How to fix error E:34-00 on Siemens Dishwasher?
If your Siemens Dishwasher is showing the error code E:34-00, try the following: * Clean the wastewater pump. * Ensure that the cover of the wastewater pump is securely clicked into position.
Why does my Siemens SX63HX52CE Dishwasher show error E:90-01?
If your Siemens Dishwasher shows error code E:90-01, it indicates that the mains voltage is too low. Contact an electrician.
What to do if Siemens SX63HX52CE Dishwasher shows error E:30-00?
If your Siemens Dishwasher shows error code E:30-00, the water protection system has been activated. Turn off the water tap.
General| Energy Efficiency Class | C |
|---|---|
| Number of Place Settings | 13 |
| Noise Level | 44 dB |
| Water Consumption | 9.5 liters |
| Dimensions (H x W x D) | 81.5 x 59.8 x 55 cm |
| Color | Stainless steel |
| Number of programs | 6 |
| Category | Dishwasher |
To Next Page