To Next Page
K
Kimberly GallegosAug 12, 2025
How to fix Siemens SX73H800BE Dishwasher error E:34-00?
- SSusan SimmonsAug 12, 2025
If your Siemens Dishwasher is displaying the error code E:34-00, you should clean the wastewater pump.
How to fix Siemens SX73H800BE Dishwasher error E:34-00?
If your Siemens Dishwasher is displaying the error code E:34-00, you should clean the wastewater pump.
What to do if Siemens Dishwasher displays E:32-00 or water supply indicator?
If your Siemens Dishwasher displays error code E:32-00 or the water supply indicator lights up, there are several possible causes: * The supply hose might be kinked. Ensure it is installed without kinks. * The water tap might be turned off. Turn it on. * The water tap might be jammed or furred up. Turn it on. * The filters in the water connection of the supply or AquaStop hose might be blocked. Turn on the water tap. You can also try switching the appliance off, pulling out the mains plug, turning off the water tap and unscrewing the water connection.
Why does my Siemens Dishwasher show E:61-03?
If your Siemens Dishwasher shows the error code E:61-03, it could be due to several reasons: * The wastewater pump might be blocked. In this case, you should clean the wastewater pump. * The cover of the wastewater pump might be loose. Secure the cover of the wastewater pump so it clicks into position. * The wastewater hose might be blocked or kinked. Reposition the wastewater hose without kinks. * The siphon connection might still be sealed. Check the connection to the siphon and open it if necessary.
What to do if Siemens SX73H800BE Dishwasher displays E:20-60?
If your Siemens Dishwasher is showing the error code E:20-60, it indicates that the appliance has detected a calcified heating element. You should descale the appliance and operate the appliance with the water softening system.
What does it mean when my Siemens SX73H800BE Dishwasher shows E:30-00?
If your Siemens Dishwasher displays the error code E:30-00, it means the water protection system has been activated. Turn off the water tap.
What does it mean when my Siemens SX73H800BE shows E:31-00?
If your Siemens Dishwasher displays the error code E:31-00, it means the water protection system has been activated. Turn off the water tap.
What to do if Siemens SX73H800BE Dishwasher displays E:61-02?
If your Siemens Dishwasher displays the error code E:61-02, it indicates that water is continuously running into the appliance. Turn off the water tap.
Why does Siemens Dishwasher show E:90-01?
If your Siemens Dishwasher shows the error code E:90-01, it indicates that the mains voltage is too low. Contact an electrician to have the mains voltage and electrical installation checked.
General| Appliance placement | Freestanding |
|---|---|
| Built-in display | Yes |
| Number of washing programs | 6 |
| Water consumption per cycle | 9.5 L |
| Noise level | 44 dB |
| AquaStop function | Yes |
| Child lock | Yes |
| Self-cleaning filter | Yes |
| Remaining time indication | Yes |
| Delay start | Yes |
| Delayed start (max) | 24 h |
| Power consumption (off) | 0.5 W |
| AC input voltage | 220 - 240 V |
| Current | 10 A |
| Product size | Full-size |
| Washing programs | Eco, Intensive, Quick |
| Dimensions (H x W x D) | 845 x 600 x 600 mm |
| AC input frequency | 50 Hz |
