Siemens Tek

Using the Transmitter
19
EN
HU
RO
FR
DE
AR
➀ On/off switch
➁ Sound level
➂ USB-socket for power plug
➃ 2.5 mm stereo socket
➄ LED
Turning the Transmitter on/off
 Use the on/off switch to turn the Transmitter on.
The blue LED is lit when the connection to the remote
control is established.
 Use the on/off switch to turn the Transmitter off.
Turn the Transmitter off when not in use.
Sound level
 Press the Sound level button to change the volume of
the audio signal.
The blue LED blinks. The number of times the LED blinks
indicates the volume level.
Charging the Transmitter
 Connect the Transmitter with the power plug to a
power supply.
As long as the red LED is lit the Transmitter is charging.
Charging time is about 5 hours depending on the
status of the rechargeable battery.
Using the Transmitter