3130
Changing the dust bag en
Replacing the HEPA filter
If your vacuum cleaner is equipped with a HEPA filter, this
should be replaced once a year.
Open the dust bag compartment lid
Unlock the HEPA filter by pushing the locking tab in
the direction of the arrow and remove it from the
vacuum cleaner.
Insert the new HEPA filter and click it into place.
After vacuuming up fine dust particles, shake out
the motor protection filter to clean it and replace
the micro-hygiene filter, activated carbon filter or
HEPA filter if necessary.
de
Optional extra en
Replacement filter pack VZ52AFG1
Contains:
5
MEGAfilt
®
Super TEX
replacement filters with lid
1 micro-hygiene filters
HEPA filter (Class H12) VZ152HFB
Recommended for allergy sufferers. Ensures very
clean exhaust air.
Replace annually.
Activated carbon filter VZ191AFB
Extra thick active carbon pad. Combats unpleasant
odours. Replace twice a year. Can be used only in
combination with a micro-hygiene filter. Remove foam
from filter holder and insert activated carbon filter.
Please note
Combination of HEPA filter and activated carbon filter
not possible.
TURBO-UNIVERSAL
®
brush VZ101TBB
All in one brushing and vacuuming of shallow pile rugs
and carpets and all hard floor coverings. Especially
suitable for picking up pet hair. The brush roller is dri-
ven by the suction of the air flow. No separate electri-
cal connection is needed.
Textile bag (permanent bag) VZ10TFG
Reusable bag with Velcro(R) fastener.
Type G
Always switch the vacuum cleaner off and disconnect the power cord from the
mains before cleaning the vacuum cleaner.
The vacuum cleaner and plastic accessories can be cleaned with a commercial
plasticcleaner.
Do not use abrasive, glass or all-purpose cleaners.
Never immerse the vacuum cleaner in water.
The dust compartment can, if necessary, be cleaned with a second vacuum
cleaner or simply wiped with a a dry cloth or dusting brush.
Subject to technical changes.
Care en
To Next Page
Loading...
