Siemens WG52A2X0GC - Basic Operation; Switching on the Appliance; Setting a Programme; Adjusting the Programme Settings

en Basic operation
38
Basic operation
13 Basic operation
Basic operation
13.1 Switching on the appli-
ance
▶
Turn the programme selector to a
programme.
13.2 Setting a programme
1. Set the programme selector to the
required programme →Page25.
2. If necessary, adjust the pro-
gramme settings →Page38.
13.3 Adjusting the pro-
gramme settings
Depending on the programme and
programme progress, you can adjust
or activate/deactivate the settings.
Note:Overview of all programme set-
tings:
→"Buttons", Page23
Requirement:A programme has
been set.
▶
Adjust the programme settings.
The programme settings are not
saved permanently for the pro-
gramme.
13.4 Loading laundry
Notes
¡ Please read the information in the
Safety →Page4 and Preventing
material damage →Page10 sec-
tions to ensure that you use the
appliance safely.
¡ To prevent creasing, take note of
the maximum load for the relevant
programme →Page25.
Requirement:Prepare and sort the
laundry.
→"Laundry", Page34
1. Open the door.
2. Ensure that the drum is empty.
3. Separate the laundry and place it
in the drum.