Siemens WG54B2A0ES - Page 25

Buttons en
25
Button Selection More information
i-Dos 2 ¡ Activate
¡ Deactivate
¡ Dispenser con-
tents
¡ Basic dosage
Briefly press the button to activate or
deactivate the intelligent dosing sys-
tem for fabric softener or liquid de-
tergent .
Press the button for approx. 3
seconds to specify the contents of the
dispenser or set the basic dosage.
→"Intelligent dosing system",
Page35
termin. Up to 24 hours Set the programme end time.
The programme duration is already in-
cluded in the set number of hours.
Once the programme has started, the
programme duration is displayed.
Note:Press or until the display
shows the required setting.
⁠ - 90 Adjust the temperature.
Set temperature in °C.
⁠ - 1400 Adjust the spin speed or activate
(Rinse Hold).
Set spin speed in rpm.
If is selected, the water is not
drained at the end of the washing
cycle and the spin cycle is deactiv-
ated. The laundry remains in the rins-
ing water.
(mains switch) ¡ Switch on
¡ Standby mode
Switch on the appliance or put it in
standby mode.
¡ Activate
¡ Deactivate
¡ Open the
HomeConnect
menu
→"Remote start", Page39
⁠3seg ¡ Activate
¡ Deactivate
→"Childproof lock", Page35
ajustes Multiple selection
→"Basic settings", Page41