Siemens WG54G2F0GB - Changing the Basic Set- Tings; Programme Counter; Calling up the Programme Counter; Cleaning and Servicing

en Programme counter
38
16.2 Changing the basic set-
tings
1. Set the programme selector to po-
sition 1.
2. Press Spinand, at the same time,
turn the programme selector to po-
sition2.
a The display shows the current
value.
3. Set the programme selector to the
required position.
→"Overview of the basic settings",
Page37
4. To change the value, press Ready
in.
5. To save the changes, switch off
the appliance.
17 Programme counter
The program counter displays the
number of finished programmes.
17.1 Calling up the pro-
gramme counter
1. Set the programme to position1.
2. Press Spin and set the pro-
gramme to position 2 at the same
time.
3. Set the programme to position5.
18 Cleaning and servi-
cing
To keep your appliance working effi-
ciently for a long time, it is important
to clean and maintain it carefully.
18.1 Cleaning the drum
CAUTION
Risk of injury!
Permanently washing at low temper-
atures and a lack of ventilation for
the appliance may damage the drum
and cause injury.
▶ Regularly run a programme for
cleaning the drum or wash at tem-
peratures of at least 60°C.
▶ Leave the appliance to dry after
every operation with the door
open, and leave the detergent
drawer to dry.
▶ Run the programme Drum Clean
without laundry and using washing
powder that contains bleach.
18.2 Cleaning the detergent
drawer
If you want to replace the liquid de-
tergent or fabric softener in the dis-
penser with another product or if the
detergent drawer is dirty, clean the
detergent dispenser.
ATTENTION!
The pump unit contains electrical
components. Electrical components
may be damaged if they come into
contact with liquids.
▶ Do not clean the pump unit in the
dishwasher and do not immerse it
in water.
▶ Protect the electrical connection
on the rear against water, deter-
gent and fabric softener residue.