Siemens WG56B2A1GB - Changing the Basic Set- Tings; Programme Counter; Calling up the Programme Counter; Cleaning and Servicing

en Programme counter
42
17.2 Changing the basic set-
tings
Requirement:The display shows all
additional buttons.
→"Displaying or hiding additional but-
tons", Page19
1. To call up the basic settings, press
Basic Settings.
2. Select the required basic setting.
→"Overview of the basic settings",
Page41
3. To change the value, press or
.
4. To reset the appliance to the fact-
ory settings, press and hold ⁠
for approx.3seconds.
5. Press Basic Settings to save the
settings.
18 Programme counter
The program counter displays the
number of finished programmes.
18.1 Calling up the pro-
gramme counter
1. Press Basic Settings.
2. Set the programme to position6.
19 Cleaning and servi-
cing
To keep your appliance working effi-
ciently for a long time, it is important
to clean and maintain it carefully.
19.1 Cleaning the drum
CAUTION
Risk of injury!
Permanently washing at low temper-
atures and a lack of ventilation for
the appliance may damage the drum
and cause injury.
▶ Regularly run a programme for
cleaning the drum or wash at tem-
peratures of at least 60°C.
▶ Leave the appliance to dry after
every operation with the door
open, and leave the detergent
drawer to dry.
▶ Select the Cottons 90°C pro-
gramme or the drum cleaning pro-
gramme in the HomeConnect
app.
Run the programme without laun-
dry and with a cleaning agent for
caring for the inside of the appli-
ance or with washing powder that
contains bleach.