Siemens WK12D320EE - Operating Modes; Washing Only Operation; Drying Only Operation; Combined Wash and Dry

15
Washing and drying
Washing only
 Set the programme selector to the desired programme,
e.g. resistentes/algod. (Cottons)
– 0 (Remaining time) and the recommended load in kg are shown
alternately on the display panel. The ! symbol flashes.
 If necessary, adjust the spin speed and select any washing options for
your individualised programme → page13.
–The secar
ˆ (dry) function must not be activated.
 Load the laundry → page8.
– Observe the maximum load,
Programme table → page28.
 Press the inicio/pausa (Start/Pause) button.
– 0 (Remaining time) is shown in the display.
The ! (Programme start) symbol lights up.
– The washing programme starts.
Drying only
 Set the programme selector to the desired drying programme.
– The display panel alternately shows 0 (remaining time) and the
recommended load in kg.
 Press the secar
ˆ(Dry) button to set the drying time → page14.
 Load the laundry → page8.
– Observe the maximum load,
Programme table → page28.
 Press the inicio/pausa (Start/Pause) button.
– 0 (Remaining time) is shown on the display panel and the
ˆ and
! symbols light up.
– The drying programme starts.
Washing and drying
Successive washing and drying.
 Set the programme selector to the desired programme,
e.g. resistentes/algod. 60°C.
– 0 (Remaining time) and the recommended load in kg are shown
alternately on the display panel. The ! symbol flashes.
 If necessary, adjust the spin speed and select any washing options for
your individualised programme → page13.
 Press the secar
ˆ (Dry) button to set the drying time → page14.
 Load the laundry → page8.
– Observe the maximum load in kg,
Programme table → page28.
 Press the inicio/pausa (Start/Pause) button.
The drying programme that is carried out is automatically determined by
the washing programme, see the Programme table → page28.
i
i