Siemens WM14K158DN User Manual

Setting the signal en
21
M Setting the signal
Setting the signal
1. Activate setting mode for the signal volume
Set to Û. Press and hold the 0 button + turn one
position to the right.
Press and hold the button for approx.
five seconds until the display elements
light up. Setting mode is activated.
2. Set the volume for the button signals (depending on model)
Press the button repeatedly until the desired
volume is reached.
To level 3
or
Set to Û to exit the setting mode for the sig-
nal volume.
3. Set the volume for the information signals
Turn the dial one position
to the right.
Press the button repeatedly
until the desired volume is
reached.
Set to Û to exit the setting mode for the signal
volume.

Siemens WM14K158DN Specifications

General

Brand	Siemens
Model	WM14K158DN
Category	Washer
Language	English