5 6
a
l
a
m
l
a
a
a
a
Ê
p
Ï
Í
5
dÉ
m
l
6
c
a
g
Ú
0
f
Stain selection
The correct treatment for every stain
Do not let stains dry. Remove any solid residue beforehand. Sort items of laundry as usual and load the washing
machine. Select a type of stain (cannot be combined).
ʑ
A total of 16 different stains can be selected. The washing machine adjusts the washing temperature, drum movement
and soaking time to suit the type of stain. Hot or cold water, gentle or intensive washing control (thanks to the new
drum structure) and a long or short soaking time ensure that the wash programme has a special sequence for each
type of stain.
ʑ
Using thedOptionsbutton, select Stain selection; using the Change Øbuttons, select the stain.
ʑ
Stains
Baby food
Blood
bott. sock dirt
Butter/edi. oil
Chocolate
Coffee
Cosmetics
Egg
Grass
Orange
Red wine stain
Soil + sand
Strawberry
Sweat
Tea
Tomato
ʑ
2 stain programmes explained in detail (examples)
Egg Soaked in lukewarm water, selected wash cycle with a higher water level and
additional rinse cycles to remove particles
Blood Blood is first “loosened” in cold water, then the selected wash programme
starts.
For the other types of stain, we have formulated comparable solutions in our intensive studies.
Reload
If you want to add additional items of laundry after the programme has started, choose Start/Reload.
The machine checks whether topping up laundry is possible. Follow the instructions in the display panel.
For safety reasons, the washing machine door remains locked when the water level and/or temperature is high,
or while the drum is rotating.
To continue the programme, press the Start/Reload button.
ä
a
~
ʔ
ʔ
ʔ
~
a
Individual settings
ʑ
Options see also the Overview of programmes
varioPerfect
*
ispeedPerfect - Standard -
jecoPerfect
speedPerfect: For washing in a shorter time with a washing outcome comparable
to that of the standard programme. Maximum load aOverview of programmes,
page 7.
ecoPerfect: For saving energy with a washing performance comparable to that
of the standard programme.
end time
*
When you select the programme, the respective time to the end of the programme
is displayed. It can be adjusted to a maximum of 24 hours in 1-hour increments.
Press the Change Ø button repeatedly until the desired number of hours is
display (h=hour). It is not possible to make adjustments once the programme has
started.
cPrewash
off - on
For heavily soiled items. Prewash at max. 30 °C.
Anti-crease
off - on
Special spin sequence with subsequent fluffing. Gentle final spin at reduced
speed. Residual moisture in the laundry is increased slightly.
3Signal
*
Select the volume of the information signals.
off ä quiet ä medium ä loud ä very loud
button signal*
Select the volume of the button signals.
off ä quiet ä medium ä loud ä very loud
language*
Select the language of the display texts.
Water Plus
off - on
Increased water level. Gentler treatment of the laundry.
Rinse stop
off - on
After the final rinse, the laundry remains in the water.
2 Extra rinse
*
max. +3 rinse cycles
Extra rinsing. Prolonged programme duration. Recommended use: for particularly
sensitive skin and/or in areas with very soft water.
[ stain selection*
Automatic treatment of tough stains aPage 6.
ʑ
Display symbols
Childlock/appliance lock
off - on #
You can lock the washing machine to prevent the functions you have set from
being changed inadvertently.
To activate: Press and hold the Options button for 5 seconds.
The #symbol lights up.
To deactivate: Press and hold the Options button for 5 seconds.
– If the programme selector is adjusted after the appliance has started:
The #symbol flashes.
First, reset the programme selector to the original programme, then deactivate.
– The childlock can remain activated until you start the next programme, even
after the machine has been switched off (the name of the last programme run
appears on the display panel).
Then you can deactivate the childlock before starting the programme and activate
it again as necessary once the programme has started.
3Foam detection Too much foam in the washing machine. Foam detection system active -
special programme sequence to reduce foam.
To Next Page
Loading...
