Operating the appliance en
25
1 Operating the
appliance
Operating the appliance
Preparing the washing
machine
Note: The washing machine must be
correctly installed and connected.
From ~ Page 45.
1. Connect the mains plug.
2. Turn on the tap.
3. Open the door.
4. Check that the drum is completely
drained. Drain if necessary.
Switching on the appliance/
selecting a programme
Press the # button. The appliance is
switched on.
The Cottons programme set at the
factory is then always displayed.
You can use this programme or select a
different programme. The programme
selector can be turned in either
direction.
Note: If you have activated the
childproof lock, you must deactivate it
before you can set a programme.
~ Page 27
The indicator light on the programme
selector lights up and the default
programme settings for the selected
programme appear in the display panel.
■ Temperature
■ Spin speed
■ The maximum load and the duration
of the programme (alternately)
■ The indicator light for the i-Dos
settings, if intelligent dosage has
been selected
■ Information on water and energy
consumption
In appliances with a drum light:
The drum is lit after switching on the
appliance, after opening and closing the
door and after starting the programme.
The light switches off automatically.
To Next Page
Loading...
