en Appliance settings
46
Dosing and adding detergent:
1. Pull out the detergent drawer.
2. Add the correct dosage to
compartment À Á depending on:
– Soiling
– Water hardness (ask your water
supply company)
– The amount of laundry
– The manufacturer's instructions
3. Close the detergent drawer.
Q Appliance settings
Appliance settings
You can change the following settings:
■ The volume of the buttons and the
information signals (e.g. at the end
of the programme)
■ Select/deselect the appliance's
automatic switch-off function
~ Page 13
■ Switch the drum-care information
signal on/off (depending on the
model). From ~ Page 30 onwards
You will need to activate the setting
mode in order to change these settings.
Activating the setting mode
1. Press the # button.
The appliance is switched on and
the Cottons programme is shown at
position 1.
2. Press the Temperature button and,
at the same time, turn the
programme selector clockwise to
position 2. Release the button.
The setting mode is activated and the
preset volume for the information
signals appears in the display panel.
You can now change the settings:
3RVLWLRQV
To Next Page
Loading...
