17
²
– If the buttons are held down, the set values automatically run
through (– downwards, + upwards).
– The respective programme duration is displayed by selecting
the programme. The programme duration is adjusted while
the programme is running if the programme duration requires
changing, e.g. due to changes in the programme settings,
foam detection, unbalanced load detection, the load
or soiling.
Ø Select addition programme settings: ~ Page 22,
~ Page 26
– ecoPerfect ¦
For saving energy with a comparable washing effect to the
standard programme. When selected, the display lamp
is lit.
– speedPerfect
G
For a shorter wash time with a comparable washing effect
to the standard programme. Observe maximum load.
~ Page 22 When selected, the display lamp is lit.
Other settings can be selected depending on the model,
e.g. Flot
$ (Rinse Hold) button:
When selected, the button indicator lamp is lit and
a corresponding symbol is indicated on the display panel:
Button Menos
Ø (Less Ironing)
Button Prelav. ! (Pre-wash)
Button Extra q (Extra rinse) – « + Ë, Ì, Í (Rinse cycles)
Button Flot $ (Rinse Hold)
6. Starting the programme
Ø Select Inicio/Carga (Start/Reload) Ü. The indicator light
is on.
To Next Page
Loading...
