Siemens WM14Y540EE - Ø Programme Settings

26
Programme settings
Depending on the programme, you can use the programme
settings to adjust the washing process even more efficiently
to your items of washing.
Programme settings:
²
– are active without acknowledgement.
– not retained after appliance is switched off.
– can be selected or deselected or changed depending
on the programme progress.
Buttons Notes
–°C+
(Temperature)
Before and during the programme the presettings
can be changed depending on the programme
progress.
Maximum spin speed depends on the programme
and model.
–
B +
(Spin)
– Terminado en/em +
(Finished in)
Delays the Finished in time (end of programme).
Before the programme starts, the end of the pro-
gramme can be preselected in h steps
up to maximum 24h.
When the programme has started, the preselected
time is displayed e.g. for 8h and counts down until
the wash programme starts. Then the programme
duration is displayed, e.g. 2:30h.
When the programme has started, the preselected
time can be changed as follows:
1. Select Inicio/Carga (Start/Reload)
Ü.
2. Select – Terminado en/em + (Finished in)
button and change Finish in time.
3. Select Inicio/Carga (Start/Reload)
Ü.
Terminado en/em +
(Finished in +)
To activate/deactivate the childlock ~ Page 18
ecoPerfect
¦
For saving energy.
speedPerfect
G
For a shorter wash time.