EasyManua.ls Logo

Siemens WM14Y540EE - Page 25

Siemens WM14Y540EE
60 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
25
Starching
²
The washing should not be treated with fabric softener.
Liquid starch can be used in all wash programmes. Pour starch
into the dispenser M according to manufacturer’s specifications
(if required clean beforehand).
Dyeing/Discolouring
Dye in household quantities only. Salt may attack stainless steel!
Observe specifications of the dye manufacturer!
Do not discolour washing in the washing machine!
Soaking
Pour soaking agent/detergent into dispenser II according to the
manufacturer’s instructions. Set programme selector to Algon
(Cottons) 30 °C and select Inicio/Carga (Start/Reload) Ü.
After approx. 10 minutes select Inicio/Carga (Start/Reload) Ü.
After the required soaking time reselect Inicio/Carga (Start/
Reload)
Ü, if the programme is to be continued or change the
programme.
²
Insert washing of the same colour. No additional detergent
required, the soaking solution is used for washing.
Microfibras + impreg.
(Outdoor/Textileguard)
Washing followed by water proofing
of weatherproof and outdoor clothing
with membrane coating and water-
resistant textiles.
² Use special detergents suitable for
machine wash. Dosage according to
manufacturer’s instructions.
Pour into dispenser II special deter-
gent and
textile guard agent (max. 170 ml)
into dispenser
M.
² The laundry must not be treated
with fabric softener.
² Before washing, remove all fabric
softener residue from detergent drawer
(all dispensers).
max. 1 kg
cold – 30 – 40 °C
0 ... 800 rpm
¦,G,«
The presettings
of the programmes
are highlighted in bold.
Programme/Type of washing Settings/Information

Related product manuals