20
Ø End of programme by Flot $ (Rinse Hold). Programme
stops in the last rinse cycle.
– Select Inicio/Carga (Start/Reload)
Ü. The programme
continues with the drain and spin cycles (if required
change spin speed).
– If only the drain cycle, but not the spin cycle, is required,
select and start the p (Drain) programme.
End of the programme
μ¸½¸Â¯´³ is indicated on the display panel.
If the symbol Å is also indicated on the display panel,
the washing machine has detected too much foam during the
wash programme and therefore automatically activates additional
rinse cycles to eliminate the foam.
²
Dose less detergent in the next wash cycle with the same load.
To Next Page
Loading...
