27
Memory 1 and 2
The programme and all settings are permanently stored under
Memoria (Memory) 1 and Memoria (Memory) 2.
Saving:
1.
Select Memoria (Memory) 1 or 2 programme.
2.
If a programme has not yet been selected for this memory
programme, select programme according to the instructions
on the display panel. The selection of the programme is
automatically acknowledged by a tick.
3.
If required, change °C (Temperature), B (Spin Speed) and
Terminado en/em (Finish in) time in the main menu and/or
select
Ö Menu (Options).
The programme is automatically saved and displayed:
The saved programme can be changed by pressing the button
under the programme for as long as the arrow is displayed.
Starching
²
The washing should not be treated with fabric softener.
Liquid starch can be used in all wash programmes. Pour starch
into the dispenser M according to manufacturer’s specifications
(if required clean beforehand).
Dyeing/Discolouring
Dye in household quantities only. Salt may attack stainless steel!
Observe specifications of the dye manufacturer! Do not discolour
washing in the washing machine!
Soaking
Pour soaking agent/detergent into dispenser II according to the
manufacturer’s instructions. Set programme selector to
Algodón (Cottons) 30 °C and select Inicio/Carga
Ü (Start/
Pause). After approx. 10 minutes select Inicio/Carga Ü (Start/
Pause). After the required soaking time reselect Inicio/Carga Ü
(Start/Pause), if the programme is to be continued or change the
programme.
²
Insert washing of the same colour. No additional detergent
required, the soaking solution is used for washing.
cccc
40
°C 1400B 0:53h
! $
Mixed Fabric
bbbb
To Next Page
Loading...
