52
to the tap (¾" = 26.4 mm):
on the appliance:
for Standard and Aqua-Secure models
2.
Carefully turn on the tap and check that the connection points
are not leaking.
²
Screw connection is under water pipe pressure.
Water drainage hose
²
– Do not kink or protract the the water supply hose.
– Height difference between the placement area and drainage
point: 0–maximum 100 cm
Drainage into a wash basin
ã Warning!
Water damage possible!
If the attached drainage hose slips out of
the washbasin due to high water pressure
when draining the washing machine,
leaking water may cause damage.
Secure the drainage hose to prevent it from
slipping out of the sink.
ã Caution!
The appliance may be damaged.
If the end of the drainage hose is immersed
in the drained water, water may be drawn
back into the appliance!
To Next Page
Loading...
