Siemens WM16W690EE - Page 18

en Overview of programmes
18
Rinse / Spin (q/centrif. 0)
Extra rinse/spin with selectable speed
Note: . The Extra Rinse (extra l) button is set by default for
this programme. If you require a spin cycle only, press the button
to deactivate the function.
-
-
$, 0 - 1600** rpm
Easy-Iron (menos Ø)
Detergent -, fabric softener è
*** Drum Clean(limpieza tambor / limpeza tambor)
Programme for cleaning and caring for the drum and the outer
tub, e.g. before running the first wash cycle, if washing
frequently at a low temperature (40 °C or lower) or if an odour
has developed after a prolonged period of non-use. The Drum
Clean indicator light flashes when you use have not used a
programme of 60 °C or higher for a long time.
Notes
■ Run the programme without laundry.
■ Use washing powder or a detergent containing bleach. To
prevent foaming, only use half the amount of detergent
recommended by the detergent manufacturer. Do not use
detergent designed for woollens or delicates.
0 kg
80, 90 °C
1200 rpm
-
Detergent -, fabric softener -
*** SuperQuick 15’/30‘
Extra-short programme of approx. 15/30 minutes, suitable for
small items of lightly soiled laundry
Note: . The Super 15 programme is run for the speedPerfect
G setting.
max. 2/3,5 kg
Ž - 40 °C
$ - 1200** rpm
ecoPerfect ¦, speedPerfect G
Detergent è, fabric softener è
*** Super 15 (express 15 min.)
Extra-short programme of approx. 15 minutes, suitable for small
items of lightly soiled laundry
Max. 2 kg
Ž - 40 °C
0 - 1200 rpm
-
Detergent è, fabric softener è
*** Quilts
Machine-washable fabrics stuffed with down, such as pillows
and duvets; also suitable for items stuffed with synthetic fibres
Note: . Wash large items separately. Use a detergent designed
for delicates and follow the instructions on the item's care label.
Use detergent sparingly.
Max. 2 kg
Ž - 60 °C
0 - 1200** rpm
ecoPerfect ¦, speedPerfect G,
Extra Rinse (extra l),
Detergent -, fabric softener -
Programme/type of laundry/information Settings
* Reduced load for the speedPerfect G setting
** Max. spin speed, depending on the model
*** Programme depends on the model