Operating the appliance en
37
Water Plus
(extra Ô)
Higher water level and additional rinse
cycle for particularly sensitive skin and/
or for areas with very soft water.
Easy-Iron
(menos Ø)
Reduces creasing thanks to a special
spin sequence followed by fluffing and
reduced spin speed.
Note: The washing's residual moisture
is increased.
sensoFresh î
The intensity of the active oxygen
treatment can be set at 2 levels:
1 Operating the
appliance
Operating the appliance
Preparing the washing
machine
Note: The washing machine must be
correctly installed and connected.
From ~ Page 14.
1. Connect the mains plug.
2. Turn on the tap.
3. Open the door.
4. Check that the drum is completely
drained. Drain if necessary.
Switching on the appliance/
selecting a programme
Press the # button. The appliance is
switched on.
The Cottons programme set at the
factory is then always displayed.
You can use this programme or select a
different programme. The programme
selector can be turned in either
direction.
Note: If you have activated the
childproof lock, you must deactivate it
before you can set a different
programme. ~ Page 40
The indicator light on the programme
selector lights up and the default
programme settings for the selected
programme appear in the display panel:
■ Temperature
■ Spin speed
■ The maximum load and the duration
of the programme (alternately)
■ Information on water and energy
consumption
In appliances with a drum light:
The drum is lit after switching on the
appliance, after opening and closing the
door and after starting the programme.
The light switches off automatically.
Ù normal; for light odours
Ú intensive; for strong odours
(cigarettes, kitchen odours)
To Next Page
Loading...
