51
Alignment
1.
Loosen lock nut in a clockwise direction with a wrench.
2.
Check alignment of the washing machine with a spirit level
and, if required, correct. Adjust the height by rotating the foot.
²
All four feet must be firmly on the floor.
The washing machine must not wobble!
3.
Tighten the lock nut against the housing.
Grip the foot and do not adjust the height.
²
– The lock nuts on all four appliance feet must be screwed
tightly against the housing!
– Loud noise formation, intense vibrations and “wandering”
may be due to incorrect alignment!
All four feet must be firmly on the floor.
www.devicemanuals.eu
All four feet must be firmly on the floor.
The washing machine must not wobble!
www.devicemanuals.eu
The washing machine must not wobble!
Tighten the lock nut against the housing.
www.devicemanuals.eu
Tighten the lock nut against the housing.
Grip the foot and do not adjust the height.
www.devicemanuals.eu
Grip the foot and do not adjust the height.
– The lock nuts on all four appliance feet must be screwed
www.devicemanuals.eu
– The lock nuts on all four appliance feet must be screwed
tightly against the housing!
www.devicemanuals.eu
tightly against the housing!
– Loud noise formation, intense vibrations and “wandering”
www.devicemanuals.eu
– Loud noise formation, intense vibrations and “wandering”
To Next Page
Loading...
Need help?
General