29
4.
Dose water proofing agent (max. 170 ml) in dispenser ÀÁ.
5.
Select Ü (Start/Pause). After-treatment of the washing
according to manufacturer’s instructions.
Starching
²
The washing should not be treated with fabric softener.
Select Rinsing programme.
Manually dose liquid starch into dispenser
ÀÁ (if required,
clean beforehand) according to manufacturer’s instructions.
Select
Ü (Start/Pause).
Dyeing/Discolouring
Dye in household quantities only. Salt may attack stainless steel!
Observe specifications of the dye manufacturer! Do not discolour
washing in the washing machine!
Soaking
1.
Dose detergent with i-Dos or pour into dispenser ÀÁ
according to manufacturer’s instructions.
2.
Set programme selector to Cottons 30 °C
and select Ü (Start/Pause).
3.
After approx. 10 minutes select Ü (Start/Pause) to stop the
programme.
4.
After the required soaking time reselect Ü (Start/Pause),
if the programme is to be continued or change the
programme.
²
Insert washing of the same colour. No additional detergent
required, the soaking solution is used for washing.
Rinse hold reached:
Please add to detergent drawer
À
the water proofing agent
and then select "start"
To Next Page
Loading...
