Siemens WU12UT6XES - Buttons

en Buttons
22
8 Buttons
The selection of programme settings depends on the programme that is set.
Button Selection More information
inicio/pausa
+carga (Start/Re-
load+Pause)
¡ Start
¡ Cancel
¡ Pause
Start, cancel or pause the pro-
gramme.
vario Speed ¡ Activate
¡ Deactivate
Activate or deactivate a shorter pro-
gramme duration.
Note:Energy consumption increases.
The washing result is not affected by
this.
termin.
(Ready In)
Up to 24 hours Set the programme end.
The programme duration is already in-
cluded in the set number of hours.
Once the programme has started, the
programme duration is displayed.
temp. °C (Tem-
perature)
– 90 °C Adjust the temperature in °C.
centrif.
(Spin)
–––– - 1200 Adjust the spin speed or activate ––
–– (Rinse Hold).
If –––– is selected, the water is
not drained at the end of the washing
cycle and the spin cycle is deactiv-
ated. The laundry remains in the rins-
ing water.
⁠3 seg (Child
Lock 3 sec.)
¡ Activate
¡ Deactivate
→"Childproof lock", Page32
prelav. (Pre-
wash)
¡ Activate
¡ Deactivate
Activate or deactivate prewash, e.g.
for washing heavily soiled laundry.
menos (Re-
duced Ironing)
¡ Activate
¡ Deactivate
Activate or deactivate the reduced
creasing programme.
In order to reduce creasing in the
laundry, the spin cycle and the spin
speed are adapted.
The laundry is damp enough after
washing that it needs to be hung out
on a washing line.