Need help?Do you have a question about the Siemens XLM 1400 and is the answer not in the manual?
Specifies the intended use of the washing machine for domestic purposes and suitable fabrics.
Important safety measures to prevent hazards like child access, electrical shock, and burns.
Instructions for setting spin speed and selecting additional options like Short Wash, Extra Rinse, Les Ironing.
Steps for performing the first washing cycle without laundry to remove residual water from factory testing.
Caution regarding clothing pretreated with solvent-based cleaning agents.
How to dispense the correct amount of detergent based on water hardness, laundry amount, and soil level.
Details on using Dispenser I (prewash), Dispenser II (main wash), and Dispenser ❀ (additives).
Step-by-step guide to removing, cleaning, and reinserting the detergent dispenser and its insert.
Steps to clean the drain pump, including removing the cover plate and drainage hose.
Detailed steps for removing the pump cover, cleaning debris, and reassembling.
Steps to clean the water inlet strainer when water flow is low.
Solutions for faults like the loading door not opening or detergent residue in the dispenser.
Troubleshooting steps for control lights not coming on, including fuse and power failure checks.
Resolving faults where the programme won't start or water isn't entering/being washed away.
Troubleshooting unsatisfactory spin results and programmes taking longer than usual.
Solutions for problems like incomplete draining, blocked hoses, or water leaks.
Resolving unsatisfactory washing results, detergent residue, and grey residues on laundry.
Addressing issues with excessive foam and the laundry not spinning correctly.
Advice on when to call customer service and how to prepare for the call.
Safety warnings regarding the weight of the machine and avoiding frost areas.
Advice on placing the machine on a solid, even surface for stability during spin cycles.
Procedure for safely removing transport bolts before the first use.
Instructions on how to store transport bolts for future transportation of the appliance.
Procedure for connecting the water supply hose to the tap and checking for leaks.
Instructions for leveling the machine using adjustable feet and a spirit level.
Guidelines for connecting the appliance to alternating current via a properly installed socket.
Ensuring the plug fits, cable is permissible, and earthing system is installed.
Warning against using multiple plugs, connectors, or extension cables.
Steps to prepare the machine for transport, including draining and disconnecting hoses.
Procedure for inserting transport protection devices to secure the drum during movement.
To Next Page
General