Why is my Sienna Luna SSM-3016 not producing steam?
If your Sienna Steam Cleaner isn't producing steam, start by checking if the water tank is full. Calcium and mineral deposits can also impact the steamer's performance. If necessary, try using distilled water.
What to do if my Sienna Steam Cleaner is leaking water?
If your Sienna Steam Cleaner is leaking water, ensure the microfiber cloth pad is attached properly. The cloth pad may be overused and needs to be changed. Cloth pads can be cleaned in a washer/dryer. If the unit continues to leak water, unplug it and wait 5 minutes before trying again.
What to do if the LED is not on for Sienna Luna SSM-3016 Steam Cleaner?
If the LED on your Sienna Steam Cleaner isn't on, first ensure the auto shutoff feature hasn't engaged by turning the power button back on. Also, ensure the steamer's power cord is correctly plugged into a 120V AC power outlet only. Check that the circuit breaker is operational and try operating the steamer from another power outlet.
Why does my Sienna Luna SSM-3016 turn off during use?
If your Sienna Steam Cleaner turns off while in use, the 'auto shut off' feature may have engaged after 30 minutes of use. Simply turn the unit back on to continue cleaning.
Details the Luna Steam Mop's innovative features for cleaning and sanitizing various floor surfaces.
Describes the Luna Plus Steam Cleaner's versatility and portable steam cleaning capabilities.
Provides essential safety precautions and warnings before using the steam mop to prevent injury.
Lists and illustrates the primary components of the Sienna Luna steam mop, labeled A through T.
Details the accessories included in the SSM-3016 model accessory kit, labeled A through H.
General| Model | SSM-3016 |
|---|---|
| Category | Steam Cleaner |
| Power | 1500 W |
| Water Tank Capacity | 1.5 L |
| Steam Pressure | 4 bar |
| Steam Flow Rate | 40 g/min |
| Cord Length | 5 m |
| Heating Time | 8 minutes |
| Accessories | Floor brush, round brush, measuring cup, funnel |
To Next Page
