Sierra Convertible Top User Manual













 

1994‐2004FordMustang
WHAT’S INCLUDED
A new SIERRA Auto Tops & Seats convertible top for the 1994-
2005 Mustang is a two piece top with a heated glass window
The glass window includes electrical defroster wiring
connectors to attach to your existing wire harness.
TOOLS REQUIRED
Heavy duty stapler + 6mm, 8mm, and 10mm staples.
Various screwdrivers.
12-point, 13mm star socket
3” long stiff wire
Pliers & drill
Contact cement spray adhesive


Theseinstructionsareprovidedasaguidetoassisttheprofessionalinstall
thisproductandnorepresentationsorwarrantiesareimpliedastotheir
completenessandaccuracy.Fromtimetotime,modificationstothedesign
oftheproductmayoccur,andthisguidemaynotreflectallsuch
modifications.Ifyouhaveanyqu
estionsabouttheproductorthis
installationguidepleasecontacttheresellerfromwhomyoupurchasedthis
product.
WEPROVIDETHESEINSTRUCTIONSASAGUIDEONLYAND
RECOMMENDYOUUSEAPROFESSIONALINSTALLER.SIERRANOR
ITSDISTRIBUTORS,AFFILIATES,ORRESELLERSARERESPONSIBLEFOR
DAMAGETOYOURVEHICLEORDAMAGETOTHEPRODUCTTHAT
MAYOCCURDURINGINSTALLATION.

ConvertibleTopInstallationGuide

Sierra Convertible Top Specifications

General

Brand	Sierra
Model	Convertible Top
Category	Automobile Accessories
Language	English

Summary

Introduction and Preparation

Included Components and Required Tools

Lists the contents of the SIERRA convertible top kit and the tools needed for installation.

SIERRA Convertible Top Warranty

Warranty Coverage and Limitations

Details the SIERRA convertible top warranty coverage, conditions, and limitations.

Convertible Top Removal Procedure

Initial Top and Header Disassembly

Covers opening the top, removing header screws, and detaching retainers.

Headliner and Cable Extraction

Details the process of removing the headliner and tension cables.

Window, Defroster, and Bracket Removal

Focuses on detaching the window section, defroster wiring, and retaining brackets.

Molding, Clips, and Side Edge Removal

Explains removing molding, clips, and sliding out the top's side edges.

Separating Fabric Top from Glass

Describes separating the main fabric top from the glass window section.

New Convertible Top Installation

Window Bracket and Top Stapling

Reattaching window brackets and stapling the new top to the frame.

Securing Top Sections to Bows

Stapling the window and top sections to the rear bow and frame.

Installing Support Rails and Cables

Installing support rails and fitting side cables through pocket sleeves.

Attaching Frame Flaps and Pockets

Attaching pocket flaps, latching the frame, and securing pocket sleeves to bows.

Re-attaching Rubbers and Rails

Reinstalling quarter side rubbers, header rubbers, and header rails.

Final Connections and System Checks

Connecting defroster wiring, securing covers, and performing final checks.

Post-Installation and Disclaimer

New Top Break-in and Care

Guidance on how the new convertible top will fit and stretch over time.

Important Disclaimer and Reseller Info

Legal disclaimers regarding installation and reseller contact information.