Sierra S5832AU2 User Manual

Procedure for initiating direct connection for panel programming via Commander II.

How to initiate Remote Programming (RPS) via a keypad, requiring specific conditions.

Performing a system walk-test to verify zone operation and system functionality.

Covers various tests like Test Report, Audible Test, RPS Callback, and Battery Test.

Setting the installer code, default code, and RPS direct connect requirements.

Enabling and configuring Maid, Duress, and Kidwatch codes for specific areas and days.

Configuring delay times for zone entry and exit, essential for user access.

Setting zone types (hardwired/wireless) and restoral configurations for supervision.

Configuring arming types, autohome, and quick arming features for system security.

Setting receiver types and message formats for central station reporting.

Programming account numbers for central station communication for areas 1 and 2.

Programming account numbers for areas 3 through 8 for central station communication.

Configuring telephone numbers for receivers and RPS callback for communication.

Setting dial type, attempt limits, ring cadence, and answer procedure for communication.

Configuring RPS callback enable, keypad RPS, and modem types for remote communication.

Defining report routing for zone alarms, troubles, and tampers to specific receivers.

Configuring report routing for soft zones, duress, opening/closing, and test reports.

Enabling audio verification and digital communication features for enhanced monitoring.

Programming report codes for zone alarms, defining conditions and reporting methods.

Programming report codes for zone restorals, bypass events, and troubles.

Programming report codes for zone tampers and soft zone events (medical, police, fire).

Defining partition types and assigning zones to specific areas for multi-area systems.

Understanding user code structure and setting master codes for areas.