42
PAIRING A KESTREL
®
OR GARMIN
®
WITH AB ELITE
Using the RANGE / MODE buttons on your KILO or the BDX App, put the KILO in BDX-X (AB
External) mode. This allows the KILO to be discoverable by the Kestrel or Garmin. BDX-X will
be displayed in the KILO. AB External will be displayed in the App. Close the BDX App.
Next, turn on your Kestrel. Follow the instructions for the Kestrel to turn on the Bluetooth
radio and connect devices to the Kestrel (https://kestrelinstruments.com/support/manuals-
anddownloads).
On the Kestrel, open the Options Menu and select BLUETOOTH, set BLUETOOTH ON. Next,
set CONCT to DEVICE. Then, scroll down and select the KILO - the KILO must be turned on
and in BDX-X mode. You should see K5K-12345 listed on the Kestrel. Select and exit the menu.
Your Kestrel is now paired to your KILO. Note - the BDX App will no longer work properly when a
Kestrel is actively paired to the KILO. However, if your KILO was previously paired and bonded
with a SIERRA3 or other BDX enabled sight this link will be maintained. When actively paired
with the Kestrel you will now be able to range targets and receive accurate ballistic holdover
solutions displayed on the Kestrel and within the KILO.
To Next Page
Loading...
Need help?
General
