To Next PageTo Next Page
Need help?Do you have a question about the Sigfox SBS-T3-902 and is the answer not in the manual?
Overview of Sigfox base stations, their function, and transceiver unit.
Diagram illustrating the connectivity of AC/DC power, LNAC, feeder, and antenna.
Guidance on installing the base station indoors/outdoors and references to LNAC datasheets.
Compliance statement with FCC Rules and Industry Canada, covering interference and exposure limits.
Regulations for radio transmitter operation, antenna gain, and interference acceptance.
Compliance with Japanese Radio Law and Telecommunications Business Law regarding modifications.
Conditions for equipment operation, interference acceptance, and antenna gain limits.
Identification of hot surface symbols and warnings regarding battery replacement risks.
Detailed technical specifications for radio, interfaces, power, and environmental compliance.
Explanation of LNAC functionality for RX rejection or RX/TX and country-specific requirements.
Information on the certified omnidirectional antenna with 5dBi gain and feeder cable.
Importance of earthing for lightning protection and static electricity evacuation.
Description of power supply input, maintenance, Ethernet, and RF connectors.
Explanation of different LED states indicating boot sequence, connection, and errors.
Detailed electrical, mechanical, and environmental specifications for the antenna.
Technical specifications for LNAC-902, including TX/RX modes and cavity filter details.
Technical specifications for LNAC-922-TX, including TX/RX modes and cavity filter details.
Technical specifications for LNAC-868, including TX/RX modes and cavity filter details.
General| Frequency | 902 MHz |
|---|---|
| Technology | Sigfox |
| Operating Temperature | -40°C to +85°C |
| Storage Temperature | -40°C to +85°C |
| Humidity | 5% to 95% non-condensing |
| Modulation | DBPSK |
| Power Consumption | Low power consumption |
| Certifications | FCC, CE |
