Need help?Do you have a question about the SIGLENT SPD3303X and is the answer not in the manual?
General| Channels | 3 |
|---|---|
| Output Voltage CH1/CH2 | 0-32 V |
| Output Current CH1/CH2 | 0-3.2 A |
| Total Power | 220 W |
| Operating Temperature | 0°C to 40°C |
| Output Voltage CH3 | 2.5/3.3/5.0V |
| Display | LCD |
| Interface | USB Device, LAN |
| Ripple and Noise CV | <1mVrms/3mVpp |
| Ripple and Noise CC | <3mArms |
| Storage Temperature | -10°C to 50°C |
Legal statement regarding the rights reserved by the copyright holder.
Information about the registered trademark and its owner.
Instructions on using the correct power cord for the instrument.
Guidance on selecting and using the correct fuse for the power supply.
Importance of proper grounding to prevent electric shock.
Advice to adhere to terminal ratings to prevent fire or electric shock.
Recommendation for adequate ventilation to prevent overheating.
Specifies the recommended environmental conditions for operation.
Highlights the key features and capabilities of the DC power supply.
Steps for inspecting the instrument and its accessories upon receipt.
Description and identification of controls and indicators on the front panel.
Explanation of the display and graphical interface elements.
Description and identification of connectors and features on the rear panel.
Procedure for verifying the voltage and current output functionality.
Overview of the three independent outputs and their modes.
Detailed steps for operating channels 1 and 2 independently.
Instructions for operating the third channel independently.
Procedure for linking channels 1 and 2 in series mode.
Procedure for linking channels 1 and 2 in parallel mode.
Configuration steps for network connectivity via LAN.
How to save and recall instrument settings.
Setup and operation of the timer function for timed outputs.
How to use the waveform display feature for real-time monitoring.
Displaying software, hardware, and serial number information.
Instructions for updating the instrument's firmware.
Rules and examples for using SCPI command syntax.
An enumerated list of available SCPI commands and subsystems.
Detailed explanations of SCPI command formats, descriptions, and examples.
Summary of the manufacturer's warranty and service policy.
Contact information including address, phone, email, and website.
To Next Page
