Need help?Do you have a question about the SIGLENT SPS5000X Series and is the answer not in the manual?
General| Brand | SIGLENT |
|---|---|
| Model | SPS5000X Series |
| Category | Power Supply |
| Language | English |
Key safety precautions to prevent personal injury and instrument damage.
Explanation of safety symbols and terms used in the manual and on the instrument.
Specifies operating conditions: ambient temperature, humidity, and altitude.
Covers overvoltage category and pollution degree requirements.
Steps to inspect the equipment and packaging upon delivery.
Check for damage to the packaging box or foam pad.
Verify for mechanical damage, missing parts, or test failures.
Ensure all included accessories are delivered correctly.
Shows front panel types and identifies key controls and ports.
Explains UI for different models and control elements.
Covers version info, upgrade, restore defaults, and beeper setup.
Connecting multiple instruments in series or parallel.
Series/parallel modes for dual and three-channel units.
Setting up sequential list outputs for single and multi-channel models.
Configuring OCP/OVP, CC/CV priority, and bleeder control.
Setting output ON/OFF delay times and internal resistance.
Voltage/current control using external signals (voltage/resistance).
Remote ON/OFF control and multi-channel mode settings.
Settings for USB, GPIB, and LAN communication.
Using NI-VISA, Sockets for remote operation.
Overview of SCPI command categories.
Details on IEEE common and measurement SCPI commands.
SCPI for OVP, OCP, slopes, and response modes.
SCPI for list step and value configuration.
SCPI for button sound, network, and device settings.
Steps for first-time connection via network cable.
Using the web interface for settings and list operation.
Resolving issues with no display or no voltage output.
Troubleshooting U disk recognition problems.
To Next Page
