ANT+ REMOTE CONTROL
The ROX 12.1 EVO can also be connected and controlled with an ANT+ remote. Depending on the
remote, you have the option to assign your own functions to buttons. To do this, connect your ROX 12.1
EVO to the corresponding ANT+ remote.
NOTE: To pair the remote, it may be necessary to set the remote to pairing mode (refer to the
remote manufacturer’s user manual).
To connect an e-bike to the ROX 12.1 EVO, select the menu item E-bike>Search e-bike in the connection
settings. To find out if your e-bike is compatible with the ROX 12.1, please refer to the following list:
COMPATIBILITY LIST
The e-bike must be in the vicinity (maximum distance approx. 50 m) and switched on for pairing. If further
steps are necessary on the e-bike side to connect the e-bike with a display, please refer to the user
manual of your e-bike.
E-BIKE
To Next Page
Loading...
