RADAR
The ROX 12.1 EVO can be connected to a radar sensor. To do this, turn on the radar to be able to pair it
with the ROX 12.1 EVO. If a radar is paired, you have the following setting options:
– Display of the radar bar
– Setting the tones
As soon as the radar sensor is paired, the radar icon is displayed on the selected page. This element and
the corresponding bar is always visible and in every menu and disappears only when the radar sensor is
no longer active or the connection is actively disconnected.
FE-C / SMART INDOOR TRAINER
If you have a Smart Indoor Trainer that supports the ANT+ FE-C profile, you can connect it to the ROX
12.1. Once the Smart Trainer is connected, you can control it using the ROX 12.1 EVO.
It is recommended to calibrate the Smart Trainer from time to time (please refer to the user manual /
instructions of the Smart Trainer manufacturer). You can easily perform the calibration using ROX 12.1
EVO. Simply connect the Smart Trainer to your ROX 12.1 EVO in the menu
‘Settings/Connections/Connect Sensor/Connected Sensors/Indoor Trainer -> Calibration and follow the
instructions on the ROX 12.1 EVO.
To Next Page
Loading...
