Sigma ROX 12.1 EVO - ROTOR POWERMETER INTEGRATION; ROTOMETER POWERMETER SETUP; ELECTRONIC SHIFTING CONTROL; GEAR RATIO DISPLAY SETUP

12.07.23, 16:19
ROX 12.1 EVO SIGMA SPORT
https://alpha.sigmasport.com/product/rox-12-1-evo/?tab=service#resource-39195-technical-information-rox-12-1-evo
22/37
ROTOR POWERMETER
If Rotor is used, it must be connected as a rotor powermeter, otherwise it will not be possible to display the
OCA/OCP values.
SHIFTING
You have the possibility to couple your electronic shifting. To get the correct gear ratio displayed during
training, you must enter the number of teeth of the chainring as well as sprocket.
SHIMANO DI2 – D – FLY CHANNELS:
The ROX 12.1 EVO supports Shimano D-Fly Channels, by means of which you can control the ROX 12.1.
In doing so, you have the following options that you can set in the ROX 12.1:
– Next page (scroll)
– Previous page (scroll)
– Start/Lap
– Stop
You also have the option to put the functions on the same button with different operation:
– Single press
– Double press
– Press and hold