With the ROX 12.1 EVO you have the option to create a route with several points. To do this, you first
proceed in the same way as for single-point navigation. Once you are in the list of points, simply press
“Add point.” to add a waypoint or via point. The following type of destinations can be added:
– Address
– POI (Point of Interesst)
o POI search around the current position
o POI around an individual position (e.g. an address or point on the map)
o POI around an already set waypoint
– Point on map
– Point based on coordinates
– A favorite point
– One of the Last Destinations
A route can consist of up to 50 points. The order can be easily changed by holding down an entry and then
moving it in the desired direction. While the point is held down, it is highlighted in gray.
MULTIPOINT NAVIGATION
To Next Page
Loading...
