The following options are available in the context menu:
– Delete all Deletes all entries
– Delete selection Select items you want to remove again
– Reverse sequence You can reverse the entire sequence. This means that they do not travel from A ► B
but B ► A.
– Routing options If you want other routing options for this selection of points than those that are stored
in the sport profile, you have the option to do so here
Once you have finished compiling the points, select “Show route” to calculate the route. Here you also get
an overview of the created route with the information about distance and altitude meters as well as the
altitude profile, which can be reached by swiping. again, the current position is seen as the starting point
and from there a route is created.
The ROX 12.1 EVO also offers the possibility to plan a route independently of the current position. This
can also be in another country, for example, to plan his first tour for the next bike trip.
To do this, proceed in the same way as described under point 1.2 Multi-point navigation. You need at least
2 points, because the current position should not be taken into account.
When you have created a route, select the cogwheel to open the options.
Remove the checkmark from ‘Start: Current position’ to set the starting point to the first point in the list.
ROUTENPLANUNG AM ROX 12.1 EVO
To Next Page
Loading...
