-Press and hold the RIDE button for 5 seconds to activate. Connect the RIDE app or
configure the general settings of your device manually. Select whether you want to add
sensors.
Finish the initial setup.
TIP: The APP offers you many functions for setting up and customizing the ROX 12.1. For more
information on the app’s functions, see
CHAPTER SETTING CONNECTIONS > RIDE APP
.
Every time you turn on the device, the ROX 12.1 EVO starts in the home screen. The last sport profile
used is always loaded. If you want to change the sport profile, you must do this before starting the
training.
If you have switched on GPS in the active sport profile (this is already the case with most profiles in the
delivery state), the ROX 12.1 EVO starts searching for GPS satellites directly after switching on.
HOMESCREEN
FIRST START ROX 12.1 EVO
TRAINING WITH THE ROX 12.1 EVO
BEFORE TRAINING
To Next Page
Loading...
