– Sync. Sensors
– Cancel Workout*
– Cancel Navigation*
– Navigation instructions on/off*
– List turns*
– Mark position
– Altitude Calibration
– Auto Pause On/Off
– Auto Lap On/Off
– Strava Live Segments On/Off
– Smart Notification On/Off
ShortCut bottom
By swiping from bottom to top you get to a navigation shortcut menu. Here you can select your favorite
destinations, last destinations or even your home address as a navigation point and the ROX calculates
the route.
After pressing “Stop” to end the training, you can decide whether to save, continue or delete the training.
After clicking on Save, the personal achievements and then the evaluation of the training will appear.
READ
MORE UNDER EVALUATION OF THE TRAINING ON THE DEVICE
CRASH ALERT
Crash Alert uses the acceleration data in the device to detect falls. You can store emergency contacts in
the SIGMA RIDE app, who will then be automatically notified in the event of a fall. If you have not stored
any emergency contacts, your emergency information will be displayed on the device after the fall – you
can also set this via the app.
The process for the crash alert is as follows:
1. fall is detected
2. device signals fall and offers user 30s time to react
3. if there is no reaction, the SIGMA RIDE app is informed (if connected and set up) and the emergency
information is shown on the display
4. emergency contacts (if set up) are informed via SMS and sent the current GPS position.
If you do not want to use the crash alert, you can switch it off in the device settings.
SMART TRAINER
SAVING AND EVALUATING
OTHER TRAINING FUNCTIONS
To Next Page
Loading...
