Do you have a question about the Sigmar marine B0 20 and is the answer not in the manual?
Brand | Sigmar marine |
---|---|
Model | B0 20 |
Category | Boiler |
Language | English |
Select a dry, well-ventilated location for the water heater to prevent condensation.
Fix the unit to a flat surface and make hydraulic and engine cooling connections.
Connect the unit to AC power using a suitable switch and fuse, ensuring correct voltage.
Adjust the thermostat to the desired temperature after shutting off power.
Procedure to reset the double thermostat after an overheat shutdown.
Drain the unit for winter and regularly check pipe joints, screws, and electrical safety.