C-DIAS PROCESSOR MODULE CCP 521
15.03.2016 Page 1
C-DIAS Processor Module CCP 521
The CCP 521 processor module runs the control program and
thereby represents an essential component of an automation sys-
tem. The internal DC/DC converter powers all modules on a
C-DIAS module carrier.
The CAN bus, an Ethernet interface or the USB device (Mini USB)
can be used as the online interface.
A 7-segment display and 2 status LEDs provide information on the
actual status of the CPU.
For program updates, the integrated USB Host interface can be
used (USB stick, keyboard). With help from the exchangeable SD
card, the entire control program can be easily exchanged.
The CCP 521 processor module is designed to be mounted in the
control cabinet.
With the integrated VARAN manager, the processor module offers the possibility to con-
struct a high-performance VARAN system to operate for example, decentralized I/O mod-
ules, drive systems or communication modules.
Compatibility
Completely PC-compatible. The CCP 521 works with standard PC BIOS and therefore no
SIGMATEK-specific BIOS is needed; the LASAL operating system in provided.
To Next Page
Need help?
General
