Signature Hardware RYLE User Manual

1Ryle Freestanding Tub Faucet Installation Instructions
RYLE FREESTANDING TUB FAUCET
INSTALLATION INSTRUCTIONS
Installation on a concrete slab is not recommended. Observe
all local plumbing and building codes.
Unpack and inspect faucet and parts for damage. If any
damage is found, contact Customer Service at
1-866-855-2284 If you need assistance while installing your
new faucet, call our Customer Service number.
We recommend consulting a professional if you are
unfamiliar with installing bathroom xtures and plumbing.
Signature Hardware accepts no liability for any damage to the
oor, walls, plumbing, or personal injury during installation.
1. Install the rough-in valve SD1500 beneath the nished
oor with the provided M0808051 hardware.
2. Test the water pressure to ensure there is no leakage
before continuing installation. We recommend consulting
a plumbing professional if you are unfamiliar with water
pressure testing.
Water
Water
3. Connect the water supplies to the valve.
Cold
Hot
4. After the nished oor material is installed, trim away
the excess rough-in valve material.
Level
5. Assemble the faucet as specied in the above drawing.
6. Remove the cap from the rough-in valve and install the
faucet.

Signature Hardware RYLE Specifications

General

Brand	Signature Hardware
Model	RYLE
Category	Plumbing Product
Language	English

Summary

RYLE FREESTANDING TUB FAUCET INSTALLATION INSTRUCTIONS

Install Rough-In Valve

Install the rough-in valve SD1500 beneath the finished floor with provided hardware.

Test Water Pressure

Test the water pressure to ensure no leakage before continuing installation.

Connect Water Supplies

Connect the water supplies to the valve.

Trim Excess Valve Material

After the finished floor material is installed, trim away the excess rough-in valve material.

Assemble Faucet

Assemble the faucet as specified in the drawing.

Install Faucet

Remove the cap from the rough-in valve and install the faucet.

Exploded Drawing