What to do if my Signature Indoor Fireplace has no power or function?
First, ensure the Signature Indoor Fireplace is plugged into a standard 120V outlet. If it is, try pressing the power button on the control panel.
What to do if my Signature EF16-23 does not work, but Power and Fireplace switches are in the “ON” position and thermostat is set on “99”?
Turn all switches to the “OFF” position and unplug the Signature Indoor Fireplace from the wall outlet for 5-10 minutes. After this time, plug it back in and operate as normal.
Why does my Signature EF16-23 have flame effect, but doesn't blow warm air?
Check that the temperature setting on your Signature Indoor Fireplace is higher than the current room temperature. Also, try turning the fireplace button on and off several times to ensure it's in the “ON” position.
What to do if the display unit on the Signature EF16-23 control panel shows “ ” and the function indicator is quick flashing?
Unplug the Signature Indoor Fireplace from the wall outlet for 5-10 minutes. After this time, plug the unit back into the wall outlet, and operate as normal.
How to fix flame icon only present on Signature Indoor Fireplace and not displaying flame levels?
Press and hold the flame button on your Signature Indoor Fireplace for 5 seconds. The unit should “beep,” and the flame levels should then appear.
General| Brand | Signature |
|---|---|
| Model | EF16-23 |
| Category | Indoor Fireplace |
| Language | English |
To Next Page
