Temperature control
8 or -16 6 or -18 4 or -20 3 or -22 2 or -24 or
Fridge/Freezer conversion
Press the botton for 3 seconds to achieve Fridge/Freezer
conversion, the corresponding temperature icons shine.
Standby function
Long press the standby button for 10 seconds to set the standby
function.
Temperature setting
The temperature setting will be changed once you press button .
Then, the refrigerator will run according to the new temperature setting
after 15s:
Quick cooling mode
Enter: under refrigerator mode, press the button until the icon lighten.
During quick cooling mode, the refrigerator runs according to the temperatures
set at 2°C, and it will exit this mode automatically after running for 150 minutes or
temperature setting or mode setting.
Quick freezing mode
Enter: under freezer mode, press the button until the icon lighten.
During quick freezer mode, the freezer runs according to the temperatures set
at -24°C, and it will exit this mode automatically after running for 24 hours or
temperature setting or mode setting.
When the fridge power is on
All temperature icons shine within 3s after power on, for power on at the first
time, the default set temperature is -20°C. After that, every time you start the
fridge, it will run in accordance with the set temperature before last power off.
After 30s of unmanned operation, the indicator light goes out. When adjusting
the gear, you need to press the key “ ” to light up the indicator, and then
press the key “ ” again to adjust the gear.
Opening warning and alarm control
There is no door opening prompt tone; There is an open door alarm tone: when
the refrigerator door is not closed for two minutes after it is opened, the buzzer
will sound until the door is closed. Press the “ ” button to cancel the buzzer
alarm,it is recommended to close the door in time.
To Next Page
Loading...
Need help?
General
