4. OPERATION INSTRUCTIONS
1. Clock Setting
After connecting the unit to the power, the symbols "0∶00"will be visible on the
display.
a. Press " ", the hour figures flashes.
b. Rotate "K2" to adjust the hour figures, (time should be within 0--23) .
c. Press "
", the minutes flashes.
d. Rotate "K2" to adjust the minutes setting, (time should be within 0--59) .
e. Press "
" to finish the clock settings. ":" flashes, and the time will be
illuminated.
NOTE: The clock is 24 hours. After power on, if not set, the clock will show "0∶00".
2. Function Setting
a. Rotate "K1" to choose the cooking function you require. The related symbol will
illuminated .
b. Rotate "K2" to adjust the temperature.
c. Press "
" to confirm the start of cooking.
d. If step 2 is ignored, Press "
" to confirm the start of cooking and the default
time is 9 hours, the default temperature will display on the LED.
NOTE:
a. The step quantities for the adjustment time of the knobs are as follow:
0--0∶30min: step 1 minute 0∶30--9∶00hour: step 5 minutes
" to
confirm. If "
" not pressed within 3 seconds, the oven will revert back to the
previous time to continue cooking.
. Rotate "K2" to adjust the temperature when cooking begins.The related
indicator will be illuminated. Then press "
"to start cooking. If " "not pressed
in 3seconds, the oven will revert back to the previous temperatrue to continue
cooking.
3. Lamp Setting
a. Rotate "K1 "to select the relevant function, then the corresponding icon will be
on.
b. Press "
" button to start, "0∶00 "and lamp icon "
"will light up, ": "will flash.
4. Inquiring Function
In the following states, you can use inquiring function, after 3 seconds return to the
current state.
a. During working state, if the clock was set, press "
" button to see the current
time; if the reminder function was set, press "
" button to see the time of
reminder.
b. Rotate "K1" to adjust the cooking time when cooking begins. Then press "
c
To Next Page
Loading...
Need help?
General
